10 Life Lessons We Can Learn From Pellet Stove Furnace

· 6 min read
10 Life Lessons We Can Learn From Pellet Stove Furnace

Pellet Stove Furnace

Pellet stoves are available as freestanding units or fireplace inserts that give your home the look of an authentic fireplace with wood burning. They can be purchased in freestanding units as well as fireplace inserts that can give your home the look of a traditional wood-burning fireplace.

The auger transports pellets from the hopper into the combustion chamber, where they are burnt and produce heat. Sensors detect the fire and adjust the rate of operation to maintain the desired temperature of the room.

1. Energy Efficiency

Pellet stoves burn a renewable, non-toxic fuel made of compressed sawdust, bark, wood chips, and other materials that are normally dumped in landfills, but can be turned into a sustainable and clean source of heating. They help homeowners lower their energy use and lower greenhouse gas emissions. Many pellet stove owners say they have recouped their initial investment in just several years with lower heating costs.

Pellets are more dense and compressed than natural wood, making them more efficient to burn. They also produce much less creosote than traditional fireplaces made of wood. Additionally, they are packaged in plastic bags that seal out moisture and need less frequent cleaning.

Like other heating systems, pellet stoves must be properly measured and vented. A trained technician can assess your venting requirements and space requirements in order to get the best results.

During installation, the hearth is built to size and the vent is installed through a pre-cut hole your home's siding. The vent can be installed on a side wall or through the roof, depending on your preference and the local regulations.

When the vent and hearth are completed and the stove is ready to be connected and turned on. Certain manufacturers provide a remote control that makes starting and maintaining the fire easy while others come with additional sensors that monitor airflow, combustion, flue temperature, and pressure. If the system determines that it needs more or less pellets, it tells the auger to accelerate or slow down according to the situation.

All stoves have a storage hopper which can hold between 35 and 130 pounds of pellets. Hopper capacities determine how often the stove will need to be refilled and larger hoppers allow for longer periods between refills. A grille draws fresh air from the room and passes it over an exchanger that then blasts heated air into the living area through convection. A grate or an auger distributes the pellets, and an under-sink pan will collect any unburnt ones along with combustion residue.

Although pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electric heaters. Electric components that drive motorized components of stoves require a power source. This could cause a problem in a power failure, although backup systems like generators and batteries are readily available.

2. Low Maintenance

Pellet stoves can be extremely efficient, but they need some maintenance in order to operate properly. Cleaning your stove and exhaust vent on a regular basis will stop the accumulation of dangerous creosote that could cause a fire or explosion that could cause damage to your stove or even your home.

A pellet stove burns natural wood pellets or other materials (like nutshells, corn kernels or small pieces of wood scraps). An auger powered by electricity feeds the pellets from a fuel tank into the burner, and into the combustion chamber. The thermostat you set controls the speed at which pellets are fed to the burner. The fire can be kept roaring or decreased or even extinguished in accordance with the temperature you set. The ash is disposed of in an empty ash tray underneath the burner. It is easily removed and then disposed.

Pellets are made from waste products that could have been discarded in the process of processing lumber. They are a sustainable source and emit less dust than traditional wood-burning stoves, making them a cleaner burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals released by pellet stoves is significantly lower than that of modern wood stoves that are EPA-certified.

These stoves aren't required to be vented through chimneys, as is the case with traditional wood stoves. Instead, they must be vented through a wall or another exterior structure. Pellet stoves are equipped with flue ports that are located on the front or back of the appliance. They are connected to a ventpipe that extends out the house.

pellet stoves with thermostat  has one disadvantage: you have to purchase or store enough fuel pellets to last for the entire winter time. Pellet stove owners typically use three tons of wood pellets each winter, which is a cost of $200 per ton. These expenses add up over the years however, it's cheaper than purchasing and hauling firewood to traditional fireplaces or stove. It is recommended to purchase enough pellets to ensure your stove will be able to run through the coldest winter months. Additionally, you will need to have a place to keep the pellets (preferably cool and dry).

3. Reduced Carbon Footprint

Pellet stoves produce heat using renewable biomass fuels, reducing reliance on finite fossils fuels. This reduces the carbon footprint and helps diversify the sources of energy used in homes.

Even the most modern woodstoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. The emissions from pellet stoves are much lower than ones from gas furnaces. Pellets can be made from sawdust and bark as well as other wood remnants. They could also include soybeans, corn or other agricultural waste. When they are burned, they emit less particulates, which could cause respiratory problems and allergic reactions as well as carcinogens and nitrous oxide.

The feed system is the major difference between pellet stoves and wood stove. Pellet stoves come with hoppers that contain the pellets. When the thermostat or sensors indicate the room requires heating, the auger turns. The pellets are then put into the combustion chamber and burn to generate heat. The air from the combustion chamber is pushed through a heat exchanger, which transmits the heat to the blower and out into the room. This results in extremely low emissions and no creosote buildup.

After the hopper is empty, the ash gets removed by a cyclone, and deposited in an ash container. The stove is equipped with a fan that circulates clean, heated air throughout the room. Most pellet stoves require only minimal maintenance and feature a large viewing space for you and your loved ones to relax and enjoy the flames.

The most significant factor affecting pellet stove emissions is the quality of the pellets. The poor quality pellets will result in more emissions. When selecting your pellets, ensure that they meet certain standards and don't contain other ingredients like petroleum-based or urea-based products. Find a business that offers a guarantee and will repair or replace parts in the event of a problem. Some states offer homeowners an incentive to pay taxes in the event that they decide to go even greener. This is a great way to help reduce the initial cost of this type of stove and make it easier to set up.

4. Reduced Noise

Pellet stoves emit very little smoke and exhaust when compared to wood burning fireplaces. A fan is employed to distribute heat more evenly in the room. This feature is one of the reasons pellet stoves require much less maintenance than traditional wood stoves. While wood stoves have to be regularly cleaned of dust and chemicals pellet stoves require an specialized metal vacuum cleaner for routine cleaning.

Many manufacturers have made an effort to design their stoves to be easy to install, operate and maintain. Their appliances are available in a variety of styles that complement the interior decor of your home. Certain models come with a WIFI app, remote control and thermostat that can be programmed.

Most pellet stoves come with an enormous fuel hopper that can hold 35 to 130 pounds of pellets. The pellets are then fed to the combustion chamber through an auger. The amount of heat produced and the level at which the fire gets depends on the speed at which the pellets are fed into the burner. The hopper may be filled with hardwood pellets composed of dense wood species like hickory and oak, or softwood pellets. Many stoves can even burn alternative biomass pellets, such as those made from switchgrass or corn, which can be an eco-friendly option.

Because pellet stoves use a clean fuel, they emit less smoke than conventional wood-burning fireplaces and require less maintenance. They do not need chimneys, making them an ideal choice for retrofits and new construction.


In contrast to wood stoves, which need to be kept regularly cleaned of creosote and other chemicals, pellet stoves require periodic inspections to ensure proper operation and maintenance. This may include regular cleaning and inspection of the ash or "clinker" as well as the motors and fans according to the model. The dealer of your appliance can explain the proper procedures for your specific brand and model. He can also assist you to find the correct fuel for your stove and provide details on storage and safety.